Mobile
Log In Sign Up
Home > english-chinese > "girder system" in Chinese

Chinese translation for "girder system"

桁梁系统

Related Translations:
girder:  n.【建筑】纵梁,大梁,撑柱,撑杆,大型工字梁。 a framed girder构桁。adj.-less
wall girder:  墙梁
reinforcing girder:  加力梁
built girder:  组合桁
girder flange:  桁材带板
telescopic girder:  伸缩梁
i girder:  工字形大梁
hull girder:  船体梁船桁体主船体桁
wind girder:  防风梁风障梁抗风圈
gridwork girder:  格子梁
Example Sentences:
1.Mechanic model of double girder system structure and research of calculation
双层交叉梁系结构力学模型及其计算研究
2.Situated in the north and facing the south with a little to the west , the temple was built with a mixed structure of sheer wall with girder system . a typical hanging over bracket set structure of southern china
建筑座北朝南略偏西,构造形式为承重墙加柱梁系统的混合构造,柱梁系统为南方特有的叠斗式,承重墙则为砖造再予以粉刷。
3.The shell is divided into orthogonal or oblique crossing girder systems , which make up a space rigid frame structure , then an analysis is made of the endogen force of the shell structure based on the curved lever space rigid frame structure
该方法通过将壳体结构离散成相互垂直或斜交的曲杆梁系组成的空间刚架结构,进而分析曲杆空间刚架结构的内力,达到壳体内力分析的目的。
4.Dynamic test has been performed on three strengthened girders after they were being put into service . according to the measured data from the dynamic test and the calculated results of the proportion of the load distribution on steel diagonal braces and steel crane girders as well as the increased carrying capacity after strengthening in consideration of the principle of cooperative work between braces and crane girders , the feasibility , rationality , and economy of this strengthening scheme have been verified . this scheme can be applied extensively to strengthen crane girders system including concrete crane girders system hereafter
最后结合对已经加固施工并投产使用的3榀钢吊车梁的现场实际动测结果,按考虑下部钢斜撑与钢吊车梁二者协同工作的原理对钢吊车梁与下部斜撑之间的荷载分配比例以及加固后钢吊车梁的承载能力进行了进一步的计算验证和对比分析,论证了采用钢斜撑方案加固已有钢吊车梁的合理与有效性。
5.And it investigates the appearance condition ( including joint , crack , eroding , corrosion , braking pole device rupture , crane - girder ' s gnawing railway and so on ) of the whole crane - girder system on the spot , at the same time , it also actually examines the stress of the beam , chemical ingredient , distortion and railway excursion , etc . through sampling , and based on the actually examined results , it checks and calculates the carrying capacity of crane - girder system . then , based on the investigating on the spot and the calculated result , it discusses the mechanism of fatigue failure of the upper part of welded steel crane - girder , analyses the reason of steel crane - girder in the high - frequency emerging the fatigue crack , institutes the strengthened method of damaged steel crane - girder of accurate packing up workshop of the primary mill plant . finally , it presents some advice and suggestions for the repairing and strengthening method of fatigue crack of upper part of steel crane - girder in the high - frequency
针对包钢初轧厂精整车间钢吊车梁上部区域出现裂缝这一问题,本文首先综述了国内外关于焊接钢吊车梁上部区域疲劳裂缝的研究现状;其次对整个吊车梁系统的外观情况(包括连接、裂缝、腐蚀、锈蚀、制动杆件断裂、吊车啃轨等)进行了现场调查,抽样实测了梁的应力、化学成分、变形及轨道偏移等,根据实测结果,对吊车梁系统的承载能力进行了验算;然后,根据现场调查及计算结果,探讨了焊接钢吊车梁上部区域疲劳破坏的机理,分析了重级工作制钢吊车梁出现疲劳裂缝的原因,制定了初轧厂精整车间破损钢吊车梁的加固方案;最后就重级工作制钢吊车梁上部区域出现疲劳裂缝的修复与加固方案提出了一些意见和建议。
6.Based on practical project of inspecting , appraising and reinforcing a main heavy factory building , especially its steel crane girder system , of the second steel mill belonging to taiyuan steel & iron corporation , whose technology renovation leads to increase tonnage of many heavy cranes and vertical load of frame - bent structure , first the structure and its members were investigated , inspected , calculated and analyzed , and their reliability was appraised respectively and the strengthening projects or the measures to remedy were given . then , in accordance with the requirement to strengthen the girders under non - stop production , the feasibility of strengthening the crane girders by adding steel diagonal braces underneath the existing girders has been studied by inspecting and evaluating the strengthening effect of the crane girders and comparing with other reinforcing scheme
本文结合太钢(集团)有限公司第二炼钢厂主厂房由于生产工艺改造要求,加大多台重型吊车吨位及bc跨( 1 ) ( 8 )轴线框排架各层竖向(设备)荷载后,对厂房结构,尤其钢吊车梁系统进行检测鉴定与加固设计的实际工程,首先对厂房结构进行了现场调研、技术检查、测试以及内力和承载能力的计算与分析(考虑抗震) ,并根据检测、计算与分析结果,对厂房结构、构件的可靠性进行了评定,并综合提出鉴定结论和加固处理建议。
Similar Words:
"girder steel" Chinese translation, "girder steel; steel" Chinese translation, "girder stiffened" Chinese translation, "girder stiffener" Chinese translation, "girder structure" Chinese translation, "girder top plate" Chinese translation, "girder toplate" Chinese translation, "girder truss" Chinese translation, "girder web" Chinese translation, "girder with web" Chinese translation